NVIDIA nForce 590 SLI MCP HyperTransport Interface
The link between NVIDIA nForce 590 SLI MCP and SPP is a 16-bit upstream and
downstream HyperTransport interface operating at 1 GHz, similar to CPU
HyperTransport interconnect. The NVIDIA LinkBoost technology increases this
bus bandwidth by 25%. Bandwidth increases help with overall system performance.
MCP HyperTransport (HTT) is designed to overclock by up to 50 to 60%.
Overclocking the MCP HTT interface through the BIOS:
1. Load system configuration defaults in BIOS using
2. Configure system voltage settings as shown in Figure 17.
Figure 17. BIOS System Voltages Configuration for MCP HTT
DU-02451-001_v01
05/17/06
NVIDIA nForce 590 SLI Technology Chipset Overclocking
Overclocking
option
Load Defaults
27