Receiving And Storing Cid Records; Reviewing Cid Records; Deleting A Cid Record - RCA 25111 User Manual

1.9 ghz cordless handset telephone with 1.9 ghz cordless headset

Table of Contents

The summary screen shows the current time, current date, number of new CID records to be

reviewed or total number of records saved to CID memory. It is displayed until any button is

pressed.

09/04 01:45PM

RCA SUPPORT

1-8-00-511-3180

Receiving and Storing CID Records

This unit receives and displays information transmitted by your local phone company. This

information can include the phone number, date and time; or the name, phone number,

date and time. The unit can store up to 99 calls for later review. When the memory is full,

a new call automatically replaces the oldest call in memory. NEW appears in the display

for calls received that have not been reviewed. The line number for the call received is also

displayed.

• Press the Memory soft key and then press the CID softkey to enter the Call log review

mode.

• Use VOL (- or +) button to scroll through the call records.

• When you scroll to the start/end of the list, you will hear a tone and the End/Start record

will be show in the display.

Saving a CID Record to Phone Book Memory

1. While viewing a CID record, press the Option soft key.

2. Use the VOL (- or +) button to scroll to Store, press Select soft key to enter edit mode.

3. Enter Name shows in the display. Input a name. Please refer to section "Handset Name"

for name editing method.

NOTE: A name must be input otherwise the record cannot be stored.

4. Press the Save soft key, Enter Number shows in the display.

5. Edit the numbers with the dial pad.

6. Press the Save soft key to enter VIP Tone Melody selection.

7. Use the VOL (- or +) button to scroll to the desired melody.

8. Press Select soft key and you will hear a confirmation tone. Repeat steps 2 through 7 to

save other records.

1. While viewing a CID record, press the Option soft key.

2. Use the VOL (- or +) button to scroll to Delete, press Select soft key to enter Delete mode.

3. Delete? Will show in the display, press OK soft key to confirm, and you will hear a confir-

mation tone.

Table of Contents