Description Of Parameters - G-Lenz Security QIPCAM Fast User's Manual

GLENZ Security IP CAMERAFast User's Guide

3) Description of parameters

Left side "the local network refers" only makes the parameter comparison to use, right
flank is the QIPCAM current parameter. If QIPCAM and computer in identical local area
network, IPCAM parameter besides "IP", other parameters (including "subnet mask",
"gateway IP", "DNS1", "DNS2") should "refer to the inside value with the local network" to
be the same. If chooses "gains the IP address automatically", then each time starting
QIPCAM IP is indefinite, assigns automatically by the DHCP server. Therefore when
QIPCAM erects when the local area network, did not suggest that the use "gains the IP
address automatically" the function. Should better be fixed IP.
"HTTP port" is used to designate the port used by QIPCAM to offer the video service. The
default port is 80. You can also set from 1 to 65534. However, you must input the port
value whenever you open an address in IE. For example, if the http port is set as "81", you
5