How To Take A Video Record? - G-Lenz Security QIPCAM Fast User's Manual

GLENZ Security IP CAMERAFast User's Guide
Since port 80 is usually used by the modem, you can only use other ports, e.g. 81.
Therefore, you can input like http://*.net in the address field of IE to access QIPCAM from
the Internet.
Note: Some routers or modems do not allow users access servers in the LAN via public
network IP from the LAN.
Q: How to take a video record?
A: Please use monitoring software, e.g. Netcam Watcher, NetCamCenter, WeCam
Monitor 3.6, etc. QIPCAM will also release its own monitoring software.
The following is the setting methods of Netcam Watcher and NetCamCenter. The setting
methods of other monitoring software are similar. Please note to fill in "image" or "/image"
in the "JPEG path" field.
11