G-Lenz Security QIPCAM Fast User's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Overview:

QIPCAM is a section of depth the network camera which is welcome the

populace and chats ordinary the camera. The function is formidable, simple Yi Yong.

The direct connection mesh wire and chats ordinary the camera, establishes the

good IP address, then anytime and anywhere likely accesses the net through IE to

watch the video frequency equally. Suits the entertainment, to live, the work, the

monitoring and so on widespread use.

Main features

QIPCAM is an independent operation network camera, does not need the

exclusive computer and the commutating device.

The world is lightest the smallest network camera. Installs simply convenient,

the volume is exquisite, the confidentiality is good, 10/100Mbps ethernet

situation automatic diagnosis.

GLENZ Security IP CAMERAFast User's Guide

Fast User's Guide

Table of Contents

Summary of Contents for G-Lenz Security QIPCAM

Page 1 Fast User’s Guide Overview: QIPCAM is a section of depth the network camera which is welcome the populace and chats ordinary the camera. The function is formidable, simple Yi Yong. The direct connection mesh wire and chats ordinary the camera, establishes the good IP address, then anytime and anywhere likely accesses the net through IE to watch the video frequency equally.
Page 2 GLENZ Security IP CAMERAFast User’s Guide Provides the security account number hypothesis, the malicious IP visit rejection, the multi-person on-line onlooking and the single plane multiwindow jail looks at the function. Phantom resolution: 640 x 480, 320 x 240, 160 x 120. MJPEG phantom compression way.
Page 3 The click “the search” the button, then can demonstrate in the QIPCAM tabulation frame found QIPCAM, saw the chart. Then please click on “the automatic setup” the button. “the automatic setup” default use fixed IP, this IP is generally 192.168.0.139 or 192.168.1.139, or other possible IP, to have the relations with yours local area network...
Page 4 GLENZ Security IP CAMERAFast User’s Guide...
Page 5 Should better be fixed IP. “HTTP port” is used to designate the port used by QIPCAM to offer the video service. The default port is 80. You can also set from 1 to 65534. However, you must input the port...
Page 6 QIPCAMs in a LAN, you need to assign different HTTP ports for them to facilitate access from the outside network. Set up the username and password here when you log on QIPCAM to protect privacy. The default username and password is admin and admin respectively. After setting the username and password, every time you log on QIPCAM, the following dialogue box will pop up, and you cannot access it and view the video unless you’ve input the right...
Page 7 QIPCAM. Later you only need input this dynamic domain name in the IE address fence to be possible to watch QIPCAM. For instance has registered v00002.3322.org, may watch QIPCAM in global any place through http:// v00002.3322.org.
Page 8 Q: How to access QIPCAM from the public network (Internet)? A: If QIPCAM is placed in a LAN, you need to make port mapping on a router, or directly set QIPCAM as DMZ machine. The following diagram takes FR40 router as an example.
Page 9 GLENZ Security IP CAMERAFast User’s Guide Note: “Service port” must be consistent with the “HTTP port” of QIPCAM set above. If there are multiple QIPCAMs in the LAN, for example, the IP address of the 2 QIPCAM is 192.168.0.140 and the “HTTP port” is 81, the setting is as follows: If you have set up a dynamic domain name, e.g.
Page 10 GLENZ Security IP CAMERAFast User’s Guide Q: How about if I have only one network cable? 1) A: We recommend you to spend some money (dozens of yuan) to buy a multi-port router with dialup function (ADSL), e.g. TP-LINKFR40, to avoid the trouble of inserting/removing cables and rebooting the cable modem (some broadband access methods require rebooting cable modems when you replace a PC, e.g.
Page 11 Q: How to take a video record? A: Please use monitoring software, e.g. Netcam Watcher, NetCamCenter, WeCam Monitor 3.6, etc. QIPCAM will also release its own monitoring software. The following is the setting methods of Netcam Watcher and NetCamCenter. The setting methods of other monitoring software are similar.
Page 12 GLENZ Security IP CAMERAFast User’s Guide Settings of Netcam Watcher Settings of NetCamCenter...
Page 13 GLENZ Security IP CAMERAFast User’s Guide Monitoring effect figures of Netcam Watcher 4. Specifications of QIPCAM Max. frame rate: 25fps Dynamic domain name system (DDNS): Supports Dynamic IP: Supports Network interface: RJ45 Network Protocols: ARP/DHCP/IP/ICMP/TCP/UDP/HTTP/DDNS Video compression criteria: MJPEG Supported webcam: Vimicro ZC0301 (please use the accessorial webcam as much as...
Page 14 Can QIPCAM be put outdoors? QIPCAM is designed for indoors use mainly. If being used outdoors, the effect may be slightly less satisfactory, and you need to add a protection shield. Why can't I view images via the Internet while I can view them within the LAN? You need to map the port "80”...