Ipod™ (Optional); Playback; Searching For A Desired Song; Searching By Playlist - Alpine CDA-9852RB Owner's Manual

iPod™ (Optional)
SOURCE/
Rotary
POWER
encoder
MODE
An iPod™, iPod™ mini or iPod™ nano can be controlled from the
CDA-9854R/CDA-9852RB/CDA-9852RR, when connected to an
optional ALPINE Interface Adapter for iPod™ (KCA-420i). While
connected to the CDA-9854R/CDA-9852RB/
CDA-9852RR through the KCA-420i, the controls on the iPod™ are
disabled.
• For details, refer to the Owner's Manual of the connected adapter
(KCA-420i).
• For each function, refer to the iPod's documentation.
About iPods™ usable with this unit
• The unit can be used with third generation and above iPod™
photo, iPod™ minis or iPod™ nano. iPod™ Shuffle cannot be
used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
Third generation iPod:Ver. 2.3
Forth generation iPod:Ver. 3.0.2
iPod photo:Ver. 1.0
iPod mini:Ver. 1.3
iPod nano:Ver. 1.0
• The unit cannot be used with the software versions earlier
than 22nd Feb.2005. For details about "iPod Software
Update", refer to the iPod Instruction Manual.

Playback

1
Press SOURCE/POWER to switch to the iPod
mode.
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
20
-EN
BAND
/
4 5 TITLE
3
To pause playback, press
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
CDA-9854R/CDA-9852RB/CDA-9852RR, it will continue playing
after the connection.
• If using the iPod with a changer, the Versatile Link Terminal
(KCA-410C) must be used. In this case, press BAND to select the
changer mode applicable to the iPod.

Searching for a desired Song

An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the CDA-9854R/CDA-9852RB/CDA-9852RR
can use these to ease song searches.

Searching by Playlist

1
Press to select a PLAYLIST search mode.
Each press changes the search mode.
The search mode is automatically changed to the PLAYLIST
search mode 4 seconds after PLAYLIST has been selected.
PLAYLIST ARTIST
2
*1
Turn the Rotary encoder within 10 seconds, and
select a playlist.
3
Press MODE to play back a selected playlist.
To search for a song in the selected playlist
1 After selecting the playlist in step 2*
to the song search mode of the selected playlist.
2 Turn the Rotary encoder within 10 seconds to select a
song and press MODE.
The selected song is played back.
• Press and hold for at least 2 seconds in the search mode to cancel
the search mode.
• All songs in the iPod are played back by selecting the stored "iPod
1
name" in step 2* .
• Playlist search cannot be made during M.I.X. play.
/ .
ALBUM PLAYLIST
1
, press to change