Table of Contents
Advertisement
HEADSET INSTALLATION
AND OPERATING INSTRUCTIONS
Your Ultra RangeMax(without
C I D ) c o r d l e s s t e l e p h o n e i s
equipped with a 2.5mm Headset
Jack for use with an optional
accessory Headset or hands-free
operation.
If you choose to use the Headset
option, you must do the following:
INSTALLATION
Obtain an optional accessory
Headset, which is compatible with
the Ultra RangeMax(without
CID).
Once you have a compatible
2 . 5 m m H e a d s e t , l o c a t e t h e
Headset Jack on the Handset of
your Ultra RangeMax(without
CID). Connect the plug on the
Headset to the jack on the cordless
Handset. The plug should fit
securely.
Do not force the
connection. See illustration.
The Ultra RangeMax(without
CID) is also equiped with a
detachable belt clip. Align the pins
on the inside edge of the belt clip
with the notches on the side of the
Ultra RangeMax(without CID)
Handset. The belt clip should snap
securely into place. Do not force
the connection. See Illustration.
OPERATION
Note: whenever a compatible
Headset is connected to the
cordless Handset, the microphone
on the Handset will be MUTED.
This is done to limit the effect of
background noise.
T h e f o l l o w i n g o p e r a t i o n a l
characteristics apply to most
Headsets. The same may also
a p p l y t o o t h e r c o m p a t i b l e
headsets, but
assumes no
responsibility for their performance.
22
Advertisement
Table of Contents
