HANDSET FEATURES
PHONE LED
•
The PHONE LED lights when
the phone line is being used by
the handset.
•
I t f l a s h e s d u r i n g t h e
programming mode.
•
It flashes quickly when the
line is on hold.
BATT LOW LED
•
The BATT LOW LED will flash
quickly when the handset
battery is getting low and needs
to be recharged.
•
It flashes slowly when the
handset is out of the talking
range or the base station is not
powered up.
•
The BATT LOW LED glows
s t e a d i l y w h e n M U T E i s
activated.
ON/OFF KEY
•
Press the ON/OFF key to make
a call or end a call.
FLASH KEY
•
P r e s s F L A S H t o s w i t c h
between calls when Call Waiting
signal is heard.
•
When in OFF mode, pressing
FLASH and a number key
(1,2,3,4) selects the ringer type.
MEM KEY
•
U s e d t o s t o r e t e l e p h o n e
n u m b e r s i n m e m o r y a n d
perform speed number dialing.
RDL/P KEY
•
When you hear the dial tone,
pressing the RDL/P key will dial
the last number that was called
on your phone.
•
It can also be used for a brief
PAUSE when programming
speed numbers.
HOLD KEY
•
When using your phone, press
HOLD to put a call on hold
•
To return to the call , press
PHONE or HOLD.
EMGCY KEY (EMERGENCY CALL)
•
One-touch speed dial number
which can be programmed for
an emergency # or any other
frequently dialed number.\
MUTE KEY
• When using your phone, press
MUTE to temporarily turn off
the microphone.
•
To reactivate the microphone
press MUTE again.
UP KEY
•
Used to increase the earpiece
volume during a call
•
Used to increase the ringer
volume during OFF mode
DOWN KEY
•
Used to decrease the earpiece
volume during a call
•
Used to decrease the ringer
volume during OFF mode
* / TONE KEY
• In PULSE dialing mode, it is
used to switch to Temporary
Tone dialing mode
12
BASE U