Speed Number Dialing; Emergency Speed Number Dialing(Emgcy Key); To Change Or Replace A Speed Dial Number - AMERITECH 1980 Owner's Manual

OPERATING INSTRUCTIONS

SPEED NUMBER DIALING

1. Press ON/OFF to get a dial tone.
2. Press MEM and the memory location
number code (01-20).
For example, to dial the number you
assigned to location 18, you would press
ON/OFF, MEM, 1, 8.
EMERGENCY SPEED NUMBER DIALING (EMGCY key)
The EMGCY key is a dedicated speed dial key which is designed to be
used for emergency numbers, like 911, or for another frequently dialed
number. It is important to note that YOU MUST PROGRAM THE NUMBER
which will be dialed when you press EMGCY. THE MANUFACTURER
DOES NOT PRE-PROGRAM THIS NUMBER.
To dial using the EMGCY key you can simply press EMGCY on the
handset . The phone will automatically access dial tone, and dial the number
you have stored in the EMGCY location.
You can also dial the EMGCY number by pressing ON/OFF in
advance,and then press the EMGCY key.
TO CHANGE OR REPLACE A SPEED DIAL
NUMBER
To change or replace a stored number in speed dial, simply enter the
new number and store it in the memory location you wish to change.
PHONE
ON/OFF FLASH
HOLD
MEM
REDIAL MUTE
1.Press ON/OFF
980
PHONE
ON/OFF FLASH
MEM HOLD
REDIAL
MUTE
2.Press MEM
3.Enter memory location
17
BATT LOW
EMGCY
BATT LOW
EMGCY