Table of Contents
Advertisement
WALL MOUNTING
The Wall Mount adaptor is
designed to fit on standard Wall
Mount plates.
1. CHOOSE A SPOT NEAR AN
ELECTRICAL OUTLET AND A
TELEPHONE JACK.
Your phone requires a modular
telephone jack and a standard
electrical outlet (120V AC). The
power cord is six feet long; make
sure there is an electrical outlet
within reach of the base. The outlet
should not be controlled by a wall
switch. If the switch is ever turned
off, the phone will not operate.
2. POSITION THE WALL MOUNT
ADAPTOR ON THE BASE.
Attach the AC power adaptor
cord and the telephone line cord to
the wall bracket.
Line up the tabs on the wall
mount adapter with the holes on the
bottom of the base. Snap the wall
mount adaptor firmly in place.
3. MOUNT THE BASE ON THE
WALL.
P o s i t i o n t h e b a s e s o t h e
mounting screws will fit into the
holes on the bottom of the base.
Position the power cord to extend
down the wall the phone is to be
mounted on. Slide the base down
on the mounting screws until it
locks into place.
Push in
and
slide down
9
WAL
Advertisement
Table of Contents
