Deleting A Bluetooth Device From The List; Displaying The Phone Service Provider Name; Adjusting The Volume For The Microphone Input; Selecting The Output Speaker - Alpine CDE-114BTi Owner's Manual

Deleting a BLUETOOTH Device from the list

 Setting item: CLEAR DEV
1
Turn the Rotary encoder to select the BLUETOOTH
compatible device to be deleted and then press
ENT.
2
Turn the Rotary encoder to select CLEAR YES if you want
to delete and then press ENT.
Notes
• Selecting CLEAR NO will cancel the setting.
• The registration number 5 is deleted once the ignition key goes from
ACC to off.

Displaying the phone service provider name

 Setting item: SEV NAME
Note
• Depending on the character type some phone service provider name
cannot be displayed. "ID UNSENT" will be displayed.

Adjusting the volume for the microphone input

 Setting item: MIC INPUT
Rotary encoder
Note
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.

Selecting the output speaker

 Setting item: SPEAKER SL
Setting contents:
ALL / F-L / F-R / F-LR
ALL:
The sound be output from all of speakers in car.
F-L:
The sound only be output from the front left speaker.
F-R:
The sound only be output from the front right speaker.
F-LR:
The sound be output from the front left and front right speaker.
Note
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.

Displaying the firmware version

 Setting item: FW VERSION

Updating the firmware

 Setting item: FW UPDATE

Hands-Free Phone Control

About the Hands-Free Phone

Notes
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is made in
a noisy location, difficulty hearing the other person's voice is normal.
• Depending on telephone line conditions or certain mobile devices used,
voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider's network. Additionally, certain features
may not be activated by your service provider, and/or the provider's
network settings may limit the feature's functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well as
the information contained in the Owner's Manual are based upon the
latest available information and are believed to be accurate at the time
of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.

Answering a Call

1
Press .
The call starts.
Notes
• When "AUTO ANS" is set to AT ANS ON, you can receive a call
automatically. Refer to "Setting the Received Calls automatically (Auto
Answer)" on page 20.
• While calling, the source sound on the unit is muted. After calling,
playback will resume.

Hanging up the Telephone

1
Press and hold  for at least 2 seconds.
The call finishes.
Note
• While receiving you can also hang up by pressing .
21
-EN