Table of Contents
Advertisement
• If the connection is successfully changed, "CONNECTED" is
displayed for 2 seconds and the
display returns to the SETUP screen.
• If you input the wrong passcode or communications fail, "FAILED"
is displayed.
• If you want to connect another BLUETOOTH compatible device,
after disconnecting the current BLUETOOTH compatible device,
connect the BLUETOOTH compatible device you want to change to.
The PIN code is fixed as "0000".
Setting the Search Mode
You can set whether this unit can be recognised or not from a
BLUETOOTH compatible device. Normally set this to VISI M ON.
Setting item: VISIBLE M
VISI M ON: Enable recognition of this unit from the
BLUETOOTH compatible device.
VISI M OFF: Disable recognition of this unit from the
BLUETOOTH compatible device.
• Depending on the mobile phone, it may be necessary to input a
passcode. For inputting the mobile phone's passcode, refer to the
mobile phone's Owner's Manual.
Setting the Received Calls automatically (Auto Answer)
When a call is received, you can set whether to receive it automatically
or not.
Setting item: AUTO ANS
AT ANS ON: When a call is received, it is answered
automatically after about 5 seconds.
AT ANS OFF: When a call is received, it is not answered
automatically. Press
• If the received call setting on the mobile phone is on, the call will be
answered automatically even though this setting is set to OFF.
Deleting a BLUETOOTH Device from the list
You can delete the history of a previously connected BLUETOOTH
compatible device.
Setting item: CLEAR DEV
1
Turn the Rotary encoder to select the BLUETOOTH
compatible device to be deleted and then press
/
/ENT.
2
Turn the Rotary encoder to select CLEAR YES if
you want to delete and then press
• Selecting CLEAR NO will cancel the setting.
• The registration number 5 is deleted once the ignition key goes from
ACC to off.
Displaying the phone service provider name
Setting item: SEV NAME
The service provider name of the connected BLUETOOTH compatible
device will be displayed. If a BLUETOOTH compatible device is not
connected, "ID UNSENT" will also be displayed.
• Depending on the character type some phone service provider name
cannot be displayed. "ID UNSENT" will also be displayed.
18
-EN
indicator lights up, then the
to receive the call.
/
/ENT.
Adjusting the volume for the microphone input
You can emphasise or weaken the microphone input volume level.
Setting item: MIC INPUT
Turn the Rotary encoder to select the desired volume level (0~7).
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
Selecting the output speaker
You can select the connected speaker in car to output the sound signal of
telephone.
Setting item: SPEAKER SL
ALL: The sound be output from all of speakers in car.
F-L: The sound only be output from the front left speaker.
F-R: The sound only be output from the front right speaker.
F-LR: The sound be output from the front left and front right
speaker.
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
Displaying the firmware version
Setting item: FW VERSION
The current firmware version will be displayed.
Updating the firmware
Setting item: FW UPDATE
With this setting, the BLUETOOTH firmware update function can be
activated, but other devices and software may be required. For details,
consult ALPINE website.
Hands-Free Phone Control
About the Hands-Free Phone
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
• Avoid answering a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person's voice
is normal.
• Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider's network. Additionally, certain
features may not be activated by your service provider, and/or the
provider's network settings may limit the feature's functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner's Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
Hide quick links:
Advertisement
Table of Contents
