Alpine CDA-9884R Owner's Manual page 43

<JAPANESE CAR>
This unit
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory to USB Connector.
This unit
USB Connector
Remove USB memory
Pull out USB memory squarely from the USB Connector.
This unit
USB Connector
Cable (sold separately)
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognised even when
USB memory is connected, remove USB memory once, then connect
it again.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
• Route the USB cable away from another cables, etc.
Front Frame
Screws (M5 × 8)
(Included)
Mounting Bracket
USB memory
(sold separately)
Cable (sold separately)
USB memory
(sold separately)
41
-EN