Shure T Series User Manual page 11

English
THIS RADIO EQUIPMENT IS INTENDED FOR USE IN MUSICAL PROFESSIONAL ENTERTAINMENT AND SIMILAR APPLICATIONS.
NOTE: THIS RADIO APPARATUS MAY BE CAPABLE OF OPERATING ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE
CONTACT YOUR NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS
IN YOUR REGION
Frequency Range of Apparatus: 169 MHz–250 MHz
Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible
requirements.
Shure Transmitters Models T11 and T2 may be used in the countries and frequency ranges listed in Table 1.
FURNISHED ACCESSORIES
Gain Adjustment Screwdriver
Sew–in Mounting Block
(WL93; Presenter Systems Only)
Receiver AC Adapter
. . . . . . . . . . . . . . PS20 (120V), PS20E (220V), PS20UK
Guitar Cables (Guitarist systems only)
1/4" to 1/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1/4" to Mini Connector . . . . . . . . . . . . . . . . . . . . . .
Swivel Adapter (Vocal Artist Systems Only)
Plastic Carrying Case (Diversity Systems)
Plastic Carrying Case (Non-diversity Systems)
Replacements furnished in multiples of 4.
OPTIONAL ACCESSORIES AND REPLACEMENT
PARTS
Anti–Roll Device for Handheld Transmitters
Neoprene Bodypack Belt Pouch
Line Matching Output Transformer (T3 Receiver)
1.8 Meter (6 ft.) Receiver-Mixer Cable
Rack-Mount Kit (T4N Diversity Systems Only)
Amp/Powered Mixer stand for Receivers
Presenter Systems Only
Tan version of WL93 . . . . . . . . . . . . . . . . . . . . . . . . . .
Single-Mount Tie Clip (2)
(WL93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dual-Mount Tie Clip
(WL93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black Windscreen (4)
(WL93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tan Windscreen and Tie Clip (2 each)
(WL93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacement Cartridges (compatible
with WL184, WL185) . . . . . . . . . .
Tie Clip Single Microphone Holder (2)
(WL184, WL185) . . . . . . . . . . . . . . . . . . . . . . . .
Tie Clip Dual Microphone Holder (1)
(WL184, WL185) . . . . . . . . . . . . . . . . . . . . . . . .
Black Snap–fit Windscreens (4)
(WL184, WL185) . . . . . . . . . . . . . . . . . . . . . . . .
Black Foam Windscreen (4)
(WL 184, WL185) . . . . . . . . . . . . . . . . . . . . . .
Headset Systems Only
Foam Windscreens (2) and Clothing Clip (WH20) RK318WS
Croakies Headband (WH20)
Croakies Headband and Wire Frame (WH20)
Microphone and Boom Assembly (WH20)
1/4" plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Miniature Connector plug
For additional microphone service or parts information, please
contact Shure's Service department at 1–800–516–2525 or
Shure's website at www.shure.com. Outside the United States,
please contact your Authorized Shure Service Center.
ACCESSORIES, LICENSING AND WARRANTY
. . . . . . . . . . . . . . . . . 65A1659
. . . . . . . . . . 65B1733*
WA303
WA302
. . . . . . WA371
. . . . . . . WA605
. . . . WA600
. . . . . . . . . A1K
. . . . . . . . . . . . . . . . WA570
. . . . A95U
. . . . . . . . . . . WA410
. . . . . . . URT
. . . . . . . . . WA595
WL93T
RK354SB
RK307DB
RK355WS
RK304T
R183B, R184B, R185B
RK183T1
RK183T2
RK183WS
RK261BWS
. . . . . . . . . . . . . . . . . . . RK319
. . RPM600
RPM100
. . . . . . . . . . . . . . . . . . RPM102
WARRANTY INFORMATION
Shure Incorporated ("Shure") hereby warrants that these prod-
ucts will be free from defects in material and workmanship for a
period of two years from the date of purchase for all microphone
cartridge and housing assembly parts and, for a period of one
year from the date of purchase, all transmitter and receiver
parts. At its option, Shure will repair or replace the defective
product and promptly return it to you. You should retain proof of
purchase to validate the purchase date and return it with any
warranty claim. If you believe this product is defective within the
warranty period, carefully repack the unit, insure it, and return it
postpaid to:
Shure Incorporated
Attention: Service Department
222 Hartrey Avenue
Evanston, IL 60202-5730 U.S.A.
Customers outside the U.S.A. should ship the product to the au-
thorized Shure Distribution Center in their region.
DECLARATION OF CONFORMITY
We of
Shure Incorporated
222 Hartrey Ave.
Evanston IL 60202–3696 U.S.A.
847–866–2200
declare under our sole responsibility that the following products,
Model: T3
Model: T4N
were tested and found to comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Testing was completed by the following NVLAP or A2LA accredited labora-
tory:
BZT privat CETECOM GmbH
66117 Sarbruken
Unterturkheimer StrBe 6–10
Deutschland
telephone +49 681 598 – 9000
fax +49 681 598 – 9075
Shure Inc., Manufacturer.
Signed:
Name, Title: Craig Kozokar, Senior Quality Engineer
ADDITIONAL INFORMATION FOR THIS SHURE WIRELESS SYSTEM
This Shure wireless transmitter is accepted under FCC Part 74 and/or Part 90.
IMPORTANT: Licensing of Shure wireless microphone equipment is
the user's responsibility, and licensability depends on the user's clas-
sification and application, and on the selected frequency. Shure urges
the user to consult the appropriate telecommunications authority before
choosing and ordering frequencies.
Changes or modifications not expressly approved by Shure Inc. could
void your authority to operate this equipment.
8
Name: T3 Receiver
Name: T4N Diversity Receiver
Date: June 15, 1999