Edimax nMAX User Manual page 40

www.4GSource.net
Show
Authentication
Status Dialog
Enable CCX
Turn on CCKM
Enable Radio
Measurement
Non-Serving
Channel
Measurements
Limit ---
milliseconds
After you finish the settings, click 'Apply' to apply new settings, and click 'OK' to close configuration utility.
When your computer is being authenticated by
wireless authentication server, a dialog window
with the process of authentication will appear.
This function is helpful to find out the problem when you can not be authenticated,
and you can provide this information to authentication server's administrator for
debugging purpose.
Enable Cisco Compatible eXtensions. CCX is a wireless feature developed by
Cisco used to improve the wireless performance with CCX compatible wireless
devices. Check this box if you need to connect to CCX-compatible wireless
devices.
Check this box to enable CCKM (Cisco Centralized Key Management), which
enables wireless clients to roam between CCKM-enabled access points in very
short time.
When you're connecting to CCX-compatible
access point, check this box to enable radio measurement function to improve
wireless connectivity.
When you're connecting to CCX-compatible
access point, check this box to enable measurement
on unused radio channels to improve wireless connectivity.
Limit the time used for said measurement to a
certain time. Default value is 250.
- 39 -