Dynacord DPM 8016 Owner's Manual page 18

PROMATRIX 8000
use DHCP for the dynamic configuration of DPM 8016. In-
stead, of that the network configuration of the DPM 8016
should be done manually.
When a new Ethernet network which will not be connected
to the Internet is established, any network part of the IP
addresses can be defined. By choosing the appropriate
subnet mask it is possible to adapt the number of the ad-
dressable devices to your requirements.
Please contact your network administrator regarding de-
tails on the correct network configurations if one or sever-
al DPM 8016 is/are integrated in an existing Ethernet
network (with or without DHCP server) or if the network is
connected to the Internet.
DPM 8016 - 18