Advertisement
Installing and Connecting the Devices
Select a suitable installation site from which you want to monitor the desired location.
A suitable installation site must have the following features:
• Location must be located in a dry place
• As dust free as possible
• Little vibrations
• Good air circulation
• Must be located near a wall outlet in close vicinity
Select a location that is not screened off by reinforced concrete walls, mirrors, metal
shelves, etc. Close to the sender respectively receiver, there should not be any appliances
with strong electric fields (eg. cell phones, walkie-talkies, electric engines, etc.).
The above points could severely impair radio transmission respectively reduce the range.
Fastening the wall bracket
Din Jack to
TV monitor
• Look for a suitable place for mounting (possibly with
a socket)
• Screw the wall bracket with the supplied screws to a
suitable wall or a suitable platform use dowels if
relevant.
• Guide the tripod thread of the wall bracket into the
thread hole of the camera and screw each of them to
one another.
• Align the camera and screw the lateral locking bolt
tight.
3
Advertisement
