Advertisement
Basic Camera to 14" CRT Monitor installation
1. Unpack all parts from the packing box.
2. Install or mount the camera at the desired location. Do not place the camera directly into
sunlight or high light.
3. Lead the DIN cord back to your television or monitor.
NOTE:
1. To protect camera, do not expose to excessive dust or humidity.
2. Handle with care. Do not place in a location subject to vibration.
3. Do not place camera in a location subject to direct sunlight or high light.
REMEMBER: Never aim camera directly into the sun.
Camera to 14" CRT Monitor Installation Chart
Front Panel
1 2 3
Rear Panel:
CAUTION:
A distorted picture will appear if the Video input and Din input are connected to the
same channel (EX. CH 1 for Video input and CH1 for Din input) and to the same
display at the same time. Please pay attention to the installation procedure before
installing the system.
4 5 6 7 8 9
10
1 2 3 4 5 6 7 8 9 10
1. Horizontal synchronization
2. Brightness
3. Contrast
4. QUAD
5. AUTO SCAN (CAM1, CAM2, CAM3, CAM4, QUAD)
The interval period for
switching is every 4 seconds.
6. Single picture (1#)
7. Single picture (2#)
8. Single picture (3#)
9. Single picture (4#)
10. Power
1. DC input
2. Video input (1#)
3. Video input (2#)
4. Video input (3#)
5. Video input (4#)
6. Video output
7. (1#) 6 pins plug
8. (2#) 6 pins plug
9. (3#) 6 pins plug
10. (4#) 6 pins plug)
Ground
DC 12V
Video input
1
Advertisement
