Timer Programming; Setting The Humidity Level; Fan Function - Amcor DES 80 Owner's Manual

Timer programming

Setting Timer-Off when the unit is running
•
Press the "Timer" button
The LED indicates "0"
•
Press the "Timer" button to advance 1 hour (From 0, 1, 2 - 24 hours in a cyclic
mode). If the display shows "5", it means that unit will turn off automatically after
five hours.
If the timer-off is set, pressing the "Power" button will turn off the unit immediately and
the timer setting value will be cancelled automatically.
IMPORTANT
•
When the water tank is full, the timer setting value will be cancelled
automatically.
•
For safety reasons, if the appliance continues running for 36 hours, it will turn
off automatically.

Setting the Humidity level

•
Press the "Humidity" button
The LED display shows the pre-set humidity level (60%).
•
Press the "Humidity" button to advance 5% (60% to 65%, 65% to 70%, 70% to
75% ... in a cyclic mode, the humidity setting can be from 40% to 80%).
After the humidity level is set, the display will show the actual humidity level in the
room.

Fan function

When pushing the "Fan" function button, the unit will temporary terminate the dehu-
midification function, but the function of "Fan" and "Timer" will still be operational.
IMPORTANT
•
When the unit is running the room temperature will rise slightly (5-10ºC).
•
Water will start flowing into the water tank after 10-20 minutes of unit operation.
•
Water extraction will vary slightly according to temperature / humidity and the
operation mode.
5