Multi-Timbral Mode - Kawai CA91 Owner's Manual

12) Multi-timbral Mode

Multi-timbral mode allows the CA piano to receive data on more than one MIDI channel simultaneously. In this
mode, the CA piano can play different musical parts with different sounds for each part.
Multi-timbral On (On1 and On2)
This is a fl exible 16 part multi-timbral setup. You can turn individual MIDI channels on and off, and assign any
program number to any channel in the way you like. The CA piano's normal program change numbers are as-
signed in On1 (corresponding to the program numbers listed in the left half of the chart on the previous page).
General MIDI program change numbers are assigned in On2 (corresponding to the program number and bank
numbers listed in the right half of the chart on the previous page.
See page 76 for channel mute information.
Multi-timbral Off
This turns off the multi-timbral capability. Only one MIDI channel will be active and only the preset sound cur-
rently selected will be heard when a MIDI signal is received.
With this function, you can use an external sequencer to enjoy an ensemble performance using multiple sound
types (multi timbral) on a single CA piano.
Step 1
Use the MENU buttons to select the multi-timbral mode function.
12 Multi Timbre
= Off
The second line on the display shows Off, On 1, or On 2.
Step 2
Use the VALUE buttons to select Off, On1, or On2.
Step 3
When you are fi nished, press any one of the SOUND SELECT buttons to exit the menu.
The multi-timbral mode setting defaults to "Off" each time the power is turned off. You can use the user memory func-
tion (page 76), to save your desired multi-timbral mode setting. This way your current multi-timbral mode setting will
remain even after the power is turned off.
When multi-timbral mode is set to on, sounds received via MIDI on the receive channels will all be played even when
split mode is active.
Page
75
8