Editing The Settings For The Chorus / Delay / Tremolo / Rotary Effect - Kawai CA91 Owner's Manual

Editing the settings for the Chorus / Delay / Tremolo / Rotary effect

The following parameters can be edited for each effect type:
Chorus : Modulation speed – Higher values produce a faster modulation, Depth- higher values produce a
deeper chorus.
Delay : Delay Time – Higher values add longer delays, Delay Depth – Higher values create louder echoes.
Tremolo : Rate – Higher values produce faster tremolo, Depth - Higher values produce a deeper tremolo.
Rotary : Acceleration speed – higher values produce a faster change from slow to fast, Rotary Speed- higher
values produce a faster rotor speed.
Step 1
While Holding the EFFECTS button and use the VALUE buttons to select the effect type you wish to edit.
Step 2
With the EFFECTS button still held down, use the MENU buttons to select the parameter to be edited.
Effect type
Chorus
Delay 1, 2, 3
Tremolo
Rotary 1, 2
Step 3
With the EFFECTS button still held down, use the VALUE buttons to adjust the value for the selected
parameter.
As the value is set higher:
Depth : The effect becomes deeper or louder.
Rate : The speed becomes faster.
Time : The time length becomes longer.
Speed : The speed becomes faster.
Step 4
Release the EFFECTS button when you are fi nished editing.
Item
Depth, Speed
Depth, Time
Depth, Rate
Acceleration speed (time required to change the ro-
tor speed from "SLOW" to "FAST" or from "FAST" to
"SLOW"), Rotary Speed (this setting only affects the
"FAST" speed)
Page
Hold down the button.
Delay 1 Depth
= 5
Delay 1 Depth
= 6
21
3