Table of Contents
Advertisement
F. Tools and Supplies Needed
Before beginning the installation be sure the following
tools and building supplies are available:
Reciprocating saw
Pliers
Hammer
Phillips screwdriver
Flat blade screwdriver
Plumb line
Level
1/2-3/4 in. length, #6 or #8 self-drilling screws
Misc. screws and nails
G. Fireplace System Requirements
This fireplace system requires:
•
Fireplace
•
Hearth Refractory
•
Grate Assembly
•
Hearth Extension (required, sold separately)
•
Outside Air Kit
-
Duct (required for outside air installation, sold
separately)
•
Chimney System (required, sold separately)
•
Termination Cap (required, sold separately)
Framing material
Non-combustible sealant
Gloves
Framing square
Electric drill and bits
Safety glasses
Tape measure
Heat & Glo • BAY-40, PIER-40 • 34977 • Rev AA 1/11
H. Inspect Fireplace and Components
WARNING! Risk of Fire and/or Explosion! Damaged
parts could impair safe operation. DO NOT install dam-
aged, incomplete or substitute components. Keep fire-
place dry.
•
Remove fireplace and components from packaging and
inspect for damage.
•
Vent system components and doors are shipped in
separate packages.
•
Report to your dealer any parts damaged in shipment.
•
Read all the instructions before starting the
installation. Follow these instructions carefully
during the installation to ensure maximum safety
and benefit.
17
Advertisement
Table of Contents
