Do you have a question about the subwoofer and is the answer not in the manual?
Questions and answers
Jacob Hamblin
March 5, 2025
Im trying to find out more information on a powered 10" subwoofer. I have not been able to find any information on it. There is no model on it. It has RBH written on the speaker. The cone material is paper. Any information or an online manual would be great.
The subwoofer should be connected to a power supply compatible with the power consumption requirements, see the specifications section of this manual. If mounting the subwoofer on a stand, the wall, or other device only do so as recommended by an RBH Sound authorized technician.
The performance of your subwoofer can greatly affect the overall performance of your system. Without the subwoofer, the deep bass on your music CDs and special effects on movie soundtracks may not be heard and/or felt. Think of a subwoofer as a vital component that adds excitement to your theater or music experience.
IMPORTANT NOTICE REGARDING BASS MANAGEMENT: It is important the signal being sent to the subwoofer be a non-boosted or “flat” signal. To be sure of this, check the settings on your receiver or processor to make sure any “bass boost”, “super bass”...
Page 6
NOTE: There are several different surround formats available. Dolby Pro-Logic, Pro-Logic II, Dolby Digital and DTS generally have a 5 speaker plus subwoofer requirement. Dolby Digital EX and DTS ES add a center rear speaker. Please consult your audio/video professional to determine which system is best for you and...
Page 7
This section describes the functions and/or use for each of the amplifier controls located on the back of the subwoofer. See page 7 for the CT Series Amplifiers Control Diagrams; page 8 for the Signature Series and MC Series Amplifiers Control Diagrams.
Page 8
This switch should be in the “on” position when the audio signal sent to the subwoofer is not from a previously crossed-over source. The switch should be set to “off” when the audio signal sent to the subwoofer is coming from a source already using a crossover, such as the subwoofer pre-out from a receiver or pre-amplifier.
Page 9
CT Series Amplifier Diagram CT Series Amplifiers MS-8.1 and MS-10.1...
Page 10
Signature Series/MC Series Amplifier Diagram Signature Series Amplifiers 12-SE, 1010-SEN, and 1010-SEP MC Series Amplifiers TS-10AP, and TS-12AP,...
RBH Sound dealer). Performance is less The + and - polarity of the Check the entire system for than expected subwoofer wire might be proper polarity. Experiment with reversed on the subwoofer. the phase switch settings. Crossover frequency not Adjust crossover frequency adjusted correctly.
Page 15
Warranty Your RBH Sound subwoofer is covered by a limited warranty against defects in ma- terials and workmanship for a period of 5 (five) years on the woofer and cabinet, and 1 (one) year on the amplifier (if powered) from the original date of purchase.
Need help?
Do you have a question about the subwoofer and is the answer not in the manual?
Questions and answers
Im trying to find out more information on a powered 10" subwoofer. I have not been able to find any information on it. There is no model on it. It has RBH written on the speaker. The cone material is paper. Any information or an online manual would be great.