Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RBH Sound CT-5
Summary of Contents for RBH Sound CT-5
- Page 1 CT-5/CT-7 Compact Theater O w n e r ’ s M a n u a l...
-
Page 3: Break-In Period
Introduction Congratulations on your purchase of RBH CT Series speakers! Your speakers are the result of many years of research and development dedicated to producing high quality products for home audio systems. This manual contains features, setup recommendations and specifications for the RBH CT Series speakers. - Page 4 Features At the heart of the RBH CT Series speakers are proprietary aluminum cone woofers and midrange drivers. Aluminum combines stiffness, low mass and self damping properties in a manner which allows virtually uncolored presentation of program material. A powerful magnet, extended voice coil and bumped back plate give the bass/ midrange divers high excursion capability.
- Page 5 Attaching Speaker Wires When using a banana jack to attach speaker wires to the binding post terminals, insert the speaker wire into the banana jack. Next insert the banana jack into the hole provided in the top of the terminal, and then continue to tighten the nut until secure.
- Page 6 Room Setup Suggestions In order to obtain the best possible sound from your speaker system, it is impor- tant to determine where the speakers will sound best in your listening room. Room reflections from the floor, ceiling and side walls influence the balance, imaging and overall sonic quality at the listening position.
- Page 7 Room Setup Suggestions NOTE: There are several different surround formats available. Dolby Pro-Logic, Pro-Logic II, Dolby Digital and DTS generally have a 5 speaker plus subwoofer requirement. Dolby Digital EX and DTS ES add a center rear speaker. Please consult your audio/video professional to determine which system is best for you and how many speakers you will require.
-
Page 8: Specifications
Specifications Model MM-4 Speaker Type Bookshelf Center/LCR (Left, Center or Right) Frequency Response: 100Hz – 20kHz ±dB 100Hz – 20kHz ±dB Sensitivity: 5dB dB (2.V @ 1M) (2.V @ 1M) Recommended Power: 10-100 Watts 10-120 Watts Woofer: (1) ” (102mm) Aluminum (2) ”... -
Page 9: Troubleshooting
Defective parts will be repaired or replaced without charge by your dealer’s store or the location designated by RBH Sound authorized to service RBH Sound products. Charges for unauthorized service and transportation cost are not reimbursable under this warranty. - Page 12 2 Marshall Way, Layton, Utah • USA • 01 Toll Free: (00) 5-2205 • Fax: (01) 5-00 www.rbhsound.com It is RBH Sound policy to continuously incorporate improvements into our products; all specifications are subject to change without notice. Copyright © 2007 RBH Sound. All Rights Reserved.