PC-10 Subwoofer Break In Period Allow 10-15 hours of listening time to adequately break-in the PC-10 Subwoofer. During the break-in period, the driver suspension will loosen. The result of break-in will be an increase in low frequency response, improved...
Subwoofers can add considerable low- frequency, deep bass performance to any home theater or audio system. At the heart of the RBH PC-10 powered subwoofer is a compressed cellulose composite cone driver. The driver material produces enhanced bass definition and accuracy.
Page 4
Setup Suggestions (continued) Placing the subwoofer away from walls will provide the least reinforcement, making the bass sound subjectively thinner than if the woofer were closer to a wall. Good results can usually be obtained by placing a subwoofer along a wall 1-3 feet from a corner.
Page 5
(#2) is active. 6. High Level Input: These binding post terminal connectors are for the amplifier/ speaker level input from an amplifier or receiver. Usually, the LFE line level input (#4) will be used. Important! Use either the Line Input or the High Level Input.
Crossover frequency not adjusted correctly. L/R line level input is con- nected instead of the LFE line level input.. PC-10 30Hz-150kHz ±3dB 100 Watts ompressed Cellulose Composite Woofer 10” C 50-150Hz 13”H x 14½”W x 14½”D 30 lbs.
Warranty Your RBH Sound PC-10 subwoofer is covered by a limited warranty against defects in materials and workmanship for a period of 5 (five) years on the woofer and cabinet, and 1 (one) year on the amplifier from the original date of purchase.