Table of Contents
Advertisement
2. Introduction
Product
Description
Features
Additional Features
Options
COLORado™ 1 Tour User Manual Rev. 01h
The COLORado™ 1 Tour is an RGBW wash light based on 42 LEDs. It consists of a
single pod with a double bracket mounting yoke. The AC power comes directly into the
fixture's housing through a NEUTRIK® powerCON A socket. The power linking uses a
NEUTRIK® powerCON B socket. The DMX input and output sockets are of the 3-pin
XLR type. The COLORado™ 1 Tour uses a display-based control panel for
programming functions.
•
3, 4, 5, 6, or 11-channel RGBW LED bank system with ID addressing
•
Operating modes:
3-channel:
RGB control
3-channel:
HSV control (hue, saturation, and value)
4-channel:
RGBW control
4-channel:
RGB, dimmer
5-channel:
RGBW, dimmer
6-channel:
RGBW, dimmer, strobe
11-channel:
RGBW, ID, dimmer, strobe, macro, auto/custom, dimmer speed,
auto speed
•
RGBW color mixing with or without DMX controller
•
Color temperature presets (3,200~10,000 K)
•
Built-in automated programs via master/slave, DMX
•
Recall custom programs via DMX
•
Five distinct dimming curves
•
Power linking: max 12 units @ 120 V
•
NEUTRIK® powerCON connectors
•
3-pin DMX input and output connectors
•
LED display with password protection
•
Gel frame holder (4 mm max thickness)
•
Double-bracket yoke that doubles as floor stand
•
Optical systems: 15° (installed), 30° (CLENS3042)
Introduction
-3-
Advertisement
Table of Contents
