Views; Front View - Dreambox DM7020 HD User Manual

1.3 Views

1.3.1 Front view

2 x CI-slot
2 x Smartcard-Reader Dreamcrypt™
2 x CI-slot You can insert a CI-Module of your choice in one of the CI-Slots. In order to remove the ci
module, use the eject button on the right side of the CI-Slot.
2 x Smartcard-Reader Dreamcrypt
down and forward into one of the two Smartcard reader slots. Dreamcrypt™ is a registered trademark
of Dream-Multimedia.
USB 2.0 Port The USB 2.0 port is meant to connect USB 2.0 compliant devices. The extend of the
supported devices depends on the software and is always under further development.
Channel up/down Using the channel-up and -down buttons you can switch the channels directly on your
Dreambox.
OLED display The OLED-Display shows all major information.
IR sensor The remote control sensor receives the infrared signals of the Dream Remote Control.
Status LED The Status-LED indicates the Standby-Status of your Dreambox.
Standby button The Standby-Button switches your Dreambox on and off.
Insert your Dreamcrypt™ Smartcard with the golden chip facing
4
IR sensor
Channel up/down
Status LED
USB 2.0 port
OLED display
Standby button