Dreambox DM7020 HD User Manual page 32

the search is finished you can use the Navigation-Buttons (
service without having to switch services. Press the OK-Button to select the desired Teletext. This
option is only available if more than one service on the current satellite transponder actually transmits
Teletext information. If this is not the case you cannot make a selection.
Screen format: Standard mode 16:9 = on/off Enabling this shows the TuxText in 16:9 Aspect Ratio.
Press the OK-Button to enable or disable this option. The default setting is disabled.
Text/TV mode 16:9 = on/off Enabling this, switches the TV to 16:9 Aspect Ratio if the PIG-Mode is
activated with the Volume-down-Button. Press the OK-Button to enable or disable this option.
The default setting is disabled.
Note: On some older 4:3 TV's these Modes may not work. If enabled, it could happen, that your
TV switches away from the VCR or A/V socket. If you are using a 4:3 TV, we suggest not to enable
these modes.
Brightness Here you can adjust the brightness of your Teletext. Press the Navigation-Buttons (
adjust the brightness.
Transparency Here you can adjust the transparency value of your Teletext. Press the Navigation-Buttons
( ) to adjust the alpha value.
National characterset: automatic recognition = on/off Press the OK-Button to enable or disable this
option. The default setting is enabled. If disabled, use the Navigation-Buttons (
your codepage.
) to select the Teletext of another
27
) to
), to choose