Dreambox DM7020 HD User Manual page 11

Network interface The Communication Port is an Ethernet port. It is used to communicate with your
Dreambox via HTTP, FTP, NFS, Telnet, SSH and Samba to access your recorded movies, to upload
channel lists, etc. This port is also used to update the operating system of your Dreambox. Please
use a regular patch cable to connect your Dreambox to your LAN.
2 x USB 2.0 port The USB 2.0 Port is designed for devices that support the USB 2.0 standard. The amount
of supported USB devices depends on the installed image (Software) and is still under development.
Antenna output OUT / input IN (Tuner-Slot B) Connect the coaxial cable from your DVB-T antenna or
cable wall box here.
LNB input Connect the coaxial cable from your LNB here.
6