Table of Contents
Advertisement
Problem
The Focus display is not
communicating with the computer.
Pairing with an Apple device does
not work.
50
Solution
If you are using JAWS 11 or later,
make sure JAWS is properly installed
on your computer. See the section
Adding JAWS Support to the Focus
Display for more information on
configuring both USB and Bluetooth.
If you are using JAWS 10 or earlier,
or a third-party screen reading
application, you must install the
driver from the Focus Companion CD
before you can use the display.
Change the display's Bluetooth ID to
not include the MAC address before
attempting to establish a Bluetooth
partnership with an Apple device as
the MAC address will not be
recognized. Refer to the section on
using the display menu for more
information on the Bluetooth ID.
Advertisement
Table of Contents
