Table of Contents
Advertisement
7.
Select Finish and you are instructed to restart JAWS in order for
these changes to take affect. Select OK to close this message
and once more to close the Braille Basic Settings dialog box.
8.
Quit and restart JAWS and your Focus Blue is now
communicating with JAWS over Bluetooth. If you are using
JAWS 13 or later, JAWS automatically detects the correct
Bluetooth serial port.
If you are currently using the Focus display over USB and you want to
switch the connection to use Bluetooth, do the following:
1.
Press INSERT+J to open the JAWS window.
2.
Press ALT+O to open the Options menu and select Braille to
open the Braille Basic Settings dialog box.
3.
In the Default Braille Display combo box, make sure Focus is
selected then choose Modify Settings.
4.
If you are using JAWS 13 or later, in the Select the output port
edit combo box, choose Bluetooth. Otherwise, select the port
that corresponds to the outgoing COM port number that was
displayed after you finished pairing the Focus.
5.
Select OK and you are instructed to restart JAWS in order for
these changes to take affect. Select OK to close this message
and once more to close the Braille Basic Settings dialog box.
6.
Quit and restart JAWS and your Focus Blue is now
communicating with JAWS over Bluetooth. If you are using
JAWS 13 or later, JAWS automatically detects the correct
Bluetooth serial port.
Once JAWS is configured to communicate with the Focus Blue over
Bluetooth, you can switch back and forth between USB and Bluetooth
and JAWS will automatically detect the connection without the need to
change any settings. For example, if you connect the USB cable and
restart JAWS, the display will work with JAWS over USB. If you
disconnect the USB cable, then power on the Focus Blue and restart
JAWS, the display will work with JAWS over Bluetooth.
15
Advertisement
Table of Contents
