Preset Screen - TC-Helicon VOICEPRISM PLUS User's Manual Supplement

Preset Screen

VoicePrism Plus User Manual
PRESET SCREEN
You will notice a slight change in the preset screen from the
original VoicePrism. On the original VoicePrism, if you incor-
porated the Thickening effect on the lead voice, a block
would appear in the signal path diagram after the
marked
TH
lead voice block. With VoicePrism Plus, when you incorpo-
rate Voice Modeling (VM) in your preset, this block appears
as , as Voice Modeling is used to create a Thickening
VM
effect. For details on VM, refer to the button section.
VOCALS
The original VoicePrism manual illustrated how you can
assign the softknobs in the screen to control different
PRESET
parameters -- you can now access new libraries using these
same controls. The new parameters that can be assigned to
the softknobs are:
: Selecting a will automatically set the style and
VM LIB VM LIB
amount of each of the VM effects to a predetermined setting
(designed by TC-Helicon), creating pleasing results that you
can quickly recall and implement in any of your presets. The
Thickening effect, a parameter in the original VoicePrism, can
be replicated using the controls on the menu page
LEAD
under the button on the VoicePrism Plus. In the
VOCALS
menu you can set the Detune amount of the Voice
LEAD
Modeled (VM) voice and set the ratio between the dry and
VM voice with the : softknob. Pitch differences
DRY VM MIX
between the two voices, along with the Pan settings, enables
the creation of a more configurable Thickening effect.
% 7 %