Heat Considerations; Graphics System; Screen Controls; Connecting To An External Monitor - Wyse X90L User Manual

Getting Started

Heat Considerations

The thin computer's processor has been specially designed to consume little power, and
generates very little heat. However, working in a hot environment, or working for long
periods may raise the temperature. Your thin computer takes the following step to lower
temperature:
•

Graphics System

Your thin computer has a high-performance graphics system, which can easily handle the
demands of today's multimedia computing.

Screen Controls

Your screen can be adjusted for brightness and resolution.
Brightness
Function keys can increase or decrease the brightness of the display:
•
•
Resolution
To adjust the resolution settings:
1. Click Start | Settings | Control Panel, and select the Display icon.
2. Click the Settings tab. The dialog box indicates the display resolution.
3. Use the slide bar to adjust the resolution. Normally, you should use 1280 x 800, the
High Resolution with an external monitor
Higher resolution modes may be used, as long as the external monitor supports them.

Connecting to an External Monitor

The thin computer has a VGA (analog) and DVI (digital) monitor port for connecting your
thin computer to an external monitor. After the connection is made, the external monitor
mirrors what is on your thin computer's monitor. To connect an external monitor to your
thin computer:
1. Locate the VGA monitor port on the back side of your thin computer, or the DVI monitor
2. Connect the video signal cable from the external monitor (or the VGA adapter) to the
3. Connect the power cable from the external monitor to a power outlet and turn on the
If the temperature continues to rise, processor activity will be reduced. You may notice
a slight loss of performance when this happens.
Fn + ↓ decreases the display brightness
Fn + ↑ increases the display brightness
resolution that was designed for the display.
on the left side of your thin computer.
monitor port.
monitor.
19