Dragging; Scrolling; Touch Pad Precautions; Connecting A Printer - Wyse X90L User Manual

14
Chapter 3
5. Double-clicking is a common technique for selecting objects or launching programs

Dragging

There are two ways to drag:
•
•
Adjust the touch pad settings by clicking Start | Settings | Control Panel | Mouse |
Buttons. These settings allow you to change the orientation of the touch pad from
right-handed to left-handed and fine tune the pointer movement and timing of clicks.

Scrolling

When you want to scroll through a document, you may scroll with the touch pad. To scroll
vertically, drag your finger along the right side of the touch pad. Making this motion is the
same as dragging the vertical scroll box with your mouse.

Touch Pad Precautions

The touch pad is a pressure-sensitive device. If not properly cared for, it can be easily
damaged. Please take note of the following precautions:
•
•
Do not rest heavy objects on the touch pad or the touch pad buttons.

Connecting a Printer

To connect a parallel printer to your thin computer via the USB port, you will need a
USB-to-printer adapter cable (not included). Before use, you may need to install the driver
for the printer.

Power Management

Proper power management should prolong the life of the battery and enable the thin
computer to run at a cooler temperature. This section explains how to monitor battery
power, when to replace the battery, and how to make your battery last longer.
first move the pointer over the object you want to select, and then press the left button
one time. The functions of these buttons are software specific.
from icons. Once you have moved the pointer over the object you wish to select,
rapidly press the left button two times. This action is commonly referred to as
"double-clicking" an object.
Move the pointer to the desired location then press down the left button. While still
holding down the left button, move the pointer to the desired location. Release the
button.
Move the pointer to the desired location. Tap the touch pad twice quickly as if you were
double-clicking; however do not remove your finger after the second tap. Move the
cursor to the desired location. Lift your finger to finish dragging.
Make sure the touch pad does not come into contact with dirt, liquids or grease.
Do not touch the touch pad if your fingers are dirty.