Table of Contents
Advertisement
.
decide on the location of the mirror.
2.
Mark the positions of the fixing holes for the wall hanging brackets and the
incoming electrical supply to the dimensions given.
3.
Using a suitable drill, drill the hole for the fixing screws. Fit suitable wall
plugs.
note! There are no fixing screws or wall plugs suppplied with this product.
Special consideration should be given to the fixing arrangements when installing
on to a dry lined, stud partition or laminated panel wall structures. Installers
may wish to obtain alternative proprietary cavity fixing, or choose other options,
however, these methods of fixing are beyond the scope of this guide.
4.
Position the mirror housing on the wall and secure in position with the fixing
screws, making sure that it is level.
5.
connect the electrical supply to the electrical connectors.
08467-W2-A
2
4
X mm
45 mm
45 mm
220 - 240V
Advertisement
Table of Contents
