Table of Contents
Advertisement
.
decide on the location of the base units.
2.
Mark the positions of the fixing holes for the wall hanging brackets to the
dimensions given.
3.
Using a suitable drill, drill the hole for the fixing screws. Fit suitable wall
plugs.
note! There are no fixing screws or wall plugs supplied with this product. Special
consideration should be given to the fixing arrangements when installing on to
a dry lined, stud partition or laminated panel wall structures. Installers may wish
to obtain alternative proprietary cavity fixing, or choose other options, however,
these methods of fixing are beyond the scope of this guide.
4.
Fit the wall hanging brackets with the fixing screws.
5.
Fit the concealing trim to the base unit with the supplied fixing screws.
08467-W2-A
2
Advertisement
Table of Contents
