Selecting Settings For Saving Whiteboard Pages - Epson 1410Wi User Manual

5. Select the following printing options as necessary:
• Default Printer lets you select either USB or Network for the printer connection. You can change
this setting when you print in whiteboard mode, but not in annotation mode.
• Paper Size lets you select either Letter or A4 as the default paper size.
• Network Printer Settings let you enter the IP address for a printer connected to the same
network as the projector. Once this is set, you can select Get printer information to have the
projector communicate with the printer and automatically determine the printer type. You can also
select the Printer Type manually.
• Test Print lets you send a test page to the connected printer.
Note: Use the displayed keyboard to enter the IP address if necessary. Press the arrow buttons on
the remote control to highlight numbers and press Enter to select them.
6. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to
save your settings and exit the menus.
Parent topic:
Related references
Printer and All-in-One Control Command Requirements
Related tasks
Printing in Whiteboard Mode
Printing in Annotation Mode

Selecting Settings for Saving Whiteboard Pages

You can select the default settings for saving whiteboard pages from the projector.
1. Press the Menu button on the remote control.
Selecting Whiteboard Settings
150