Controlling A Networked Projector Using A Web Browser - Epson 1410Wi User Manual

Setting
Verify Exp. date of Server Cert. On
Parent topic:

Controlling a Networked Projector Using a Web Browser

Once you have connected your projector to your network, you can select projector settings and control
projection using a compatible web browser. This lets you access the projector remotely.
Note: The web setup and control features support Microsoft Internet Explorer 8.0 or later, and Safari on
networks that do not use a proxy server for connection. You cannot select all of the projector menu
settings or control all projector functions using a web browser.
Note: If you want to use a web browser to select settings when the projector is turned off, you need to
adjust the Standby Mode settings in the Extended menu.
1. Make sure the projector is turned on.
2. Start your web browser on a computer connected to the network.
3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
You see the Web Control screen and a prompt to enter a user ID and password.
4. Enter the following information in uppercase or lowercase letters, exactly as shown:
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
• For the password, enter the default password admin. (You can change the Web Control password
using the projector's Network menu.)
5. To select projector menu settings, select the name of the menu and follow the on-screen instructions
to select settings.
6. To control projection remotely, select the Web Remote option.
You see this screen:
Options
Off
Enabling WPA or EAP Security
Description
For WPA/WPA2-EAP security,
selects whether to verify the
server certificate's validity period
during certificate verification
75