Setting Up The Monitor; Extending The Monitor Stand - HP L2401x User Manual

2

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, and then follow the instructions below.

Extending the Monitor Stand

1. Lift the monitor from its box and place it face down on a flat surface.
2.
Grasp the stand and pull upward until fully extended.
CAUTION:
non-uniformity of color or disorientation of the liquid crystals.
Figure 2-1
3.
Place the monitor in an upright position on a flat surface so that the feet are touching the surface.
Press down firmly on the top center area of the monitor to ensure that the monitor is stable.
2 Chapter 2 Setting Up the Monitor
Do not touch the surface of the panel. Pressure on the panel may cause permanent
Extending the monitor stand