CEL 10.8v Li-ion User Manual page 5

Important Notes 1.0
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Battery use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep
it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Machine-specific Safety Warnings
~ Use the machine only for dry sanding. Penetration of water into the machine increases the risk of an electric shock.
~ Keep hands away from the sawing range.
Do not reach under the workpiece. Contact with the saw blade can lead to injuries.
~ Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with
electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage
or may cause an electric shock.
~ When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more
securely with both hands.
~ Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more securely than by hand.
~ Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode.
~ Avoid unintentional switching on. Ensure the On/Off switch is in the off position before inserting battery pack. Carrying the power tool with
your finger on the On/Off switch or inserting the battery pack into power tools that have the switch on invites accidents.
~ Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e.g., ~ also against continuous sun irradiation and fire. There is danger of explosion.
~ In case of damage and improper use of the battery, vapours may be emitted. Provide for fresh air and seek medical help in case of
complaints. The vapours can irritate the respiratory system.
~ When the battery is defective, liquid can escape and come into contact with adjacent components. Check any parts concerned. Clean such
parts or replace them, if required.
~ Use the battery only in conjunction with your Cel power tool. This measure alone protects the battery against dangerous overload.
~ Wear protective gloves when changing application tools/accessories. Application tools/accessories become hot after prolonged usage.
~ Do not scrape wetted materials (e. g. wall-paper) or on moist surfaces. Penetration of water into the machine increases the risk of an electric
shock.
~ Do not treat the surface to be worked with solvent-containing fluids. Materials being warmed up by the scraping can cause toxic vapours to
develop.
~ Exercise extreme caution when handling the scraper. The accessory is very sharp; danger of injury.
Always wear equipment to protect vision, hearing and lungs and suitable clothing and footwear.
Long periods of use can be harmful, take regular breaks.