Page 2
Di5a Manual AW.qxp:Layout 1 25/5/07 10:45 Page 2 Installation using supplied yoke bracket Installation using supplied yoke bracket with optional pole-mount adaptor...
Page 3
Available in black or white the Di5a will effectively blend into most backgrounds. Utilisation of the point source loudspeaker allows the Di5a to be mounted on a wall or ceiling in either horizontal or vertical orientations without affecting its performance.
Page 4
Di5a Manual AW.qxp:Layout 1 25/5/07 10:45 Page 4 Remove the yoke trims on the top and bottom panels to access the yoke bracket fixing point Lift the grille trim back using the tab to access the level control.
Page 5
Di5a Manual AW.qxp:Layout 1 25/5/07 10:45 Page 5 (SUPPLIED WITH FIXINGS) The Di5a is supplied with a mains cord appropriate to your country. For UK and European countries, please select the mains cord which suits your mains supply socket.
Page 6
IEC power cord to the suitable fixing method. to access the bracket Di5a. Note that the fixing points. Di5a is supplied with a mains cord appropriate to your country. For UK and European countries, please select the mains cord which suits your mains supply socket.
Page 7
Offer the speaker up IEC power cord to the loudspeaker control underneath the to the bracket and attach Di5a. Note that the Di5a appropriately using grille trim. it using a 5mm allen key is supplied with a mains either the RCA or and supplied fixings.
Page 9
Data can be downloaded from www.tannoy.com Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice.
Page 10
If you suspect a problem with a Tannoy product then, in the first instance, discuss it with your Tannoy dealer. If you require further assistance then we ask that you deal directly with your local Tannoy distributor. If you cannot locate your distributor please contact Customer Services, Tannoy Ltd at the address given below.
Page 11
10:45 Page 11 The following apparatus is manufactured in China for Tannoy Ltd of Rosehall Industrial Estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment. The apparatus is designed and constructed such that electromagnetic...
Page 12
T: 00 1 (519) 745 1158 E: inquiries@tannoyna.com Tannoy Deutschland T: 00 49 (180) 1111 881 E: info@tannoy.com Tannoy France T: 00 33 (0)1 7036 7473 E: ventes@tannoy.com Tannoy adopts a policy of continuous improvement and product specification is subject to change.
Need help?
Do you have a question about the Di5a and is the answer not in the manual?
Questions and answers