Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vax VO-7000
Summary of Contents for Vax VO-7000
- Page 1 Vax VO-7000 D7 IL 10/19/04 3:35 PM Page 1 Vax Careline: 0870 6061248 www.vax.co.uk VO-7000 Wet/Dry vac Please read carefully before using the Wet/Dry vac. Always fully extend with exclusive two-tank system the mains cable before use. Instruction Manual...
-
Page 2: Box Contents
Q. Small float cage G. Hose R. Blower nozzle H. Adapter S. Large foam filter Please note: 1) Parts D&E are already assembled. 2) Vax are constantly looking at ways to improve their product, therefore product may vary from one shown. -
Page 3: Safety Information
WARNING: Do not point the air outlet openings at dropped, damaged, left outdoors or dropped into people or animals. water. Return the Wet/Dry vac to a Vax Authorised Service Agent or suitably qualified per- WARNING: Always switch off and unplug Wet/Dry son for examination, repair or adjustment. - Page 4 Vax VO-7000 D7 IL 10/19/04 3:35 PM Page 4 Assembly 3. Assembling the Wet/Dry vac Once in place, do not remove the float assembly. NOTE: The large filter cage and the float ball on Wet/Dry vac lid are not removable parts.
- Page 5 The wands and tools attach to hose in the same manner. Additional tools and accessories that are not included, are available at additional cost from your Vax Service Cente or Authorised Vax Dealer. Fig.7 Press squeegee insert firmly into wet/dry nozzle opening.
-
Page 6: Cleaner Description
Vax VO-7000 D7 IL 10/19/04 3:35 PM Page 6 Use & Function 4. Using the Wet/Dry vac Cleaner Description The assembled Wet/Dry vac will look like the drawing inch diameter tools are shown on cleaner). Operate cleaner only at voltage specified on rating label on Wet/Dry vac lid. -
Page 7: Separate Wet/Dry Tanks
Vax VO-7000 D7 IL 10/19/04 3:35 PM Page 7 Use & Function Dry pick-up Disconnect Wet/Dry vac from electrical outlet. With hose removed from cleaner, slide wet/dry selector (A) to expose ‘dry tank inlet’ (B). (Fig.11) Selector will snap into place. Insert hose into ‘dry tank inlet’. -
Page 8: Automatic Wet Shut-Off
When using single tank for dry pick-up, cartridge filter must be in place. For best results, when using single tank for wet pick-up, use a Vax Large foam filter sleeve instead of the cartridge filter. (Ref to Fig.18) Automatic wet shut-off When either tank is full of liquid, the automatic shut-off mechanism will shut off Wet/Dry vac pick-up. -
Page 9: Maintenance
Vax website at www.vax.co.uk to lift. To ensure that the Wet/Dry Vax operates at peak Empty contents into a suitable receptacle. performance, it is imperative only genuine Vax filters are used. -
Page 10: Foam Filter
If the Wet/Dry vac is used as a single tank unit for wet An answerphone is available out of these hours. If pick-up, it is best to use a Vax foam filter sleeve you have queries or concerns about using your Vax, instead of the cartridge filter. -
Page 11: Troubleshooting
Vax VO-7000 D7 IL 10/19/04 3:36 PM Page 11 Troubleshooting/Technical Specification 6. Troubleshooting If a minor problem occurs, it can usually be solved quite easily by using the checklist below. PROBLEM: Wet/Dry vac won’t run Cause: Not firmly plugged in Solution: Plug unit in firmly. - Page 12 3:36 PM Page 12 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the product VO-7000 Wet/Dry vac is manufactured in compliance with the following: Safety: 73/23/EEC Low Voltage Directive, as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic Compatibility Directive, as modified by 93/68/EEC Waste electrical products should not be disposed of with household waste.
Need help?
Do you have a question about the VO-7000 and is the answer not in the manual?
Questions and answers