Changing Lan Settings; Subnet - Belkin F6D4230-4 User Manual

UsINg THE WEb-basEd adVaNCEd UsER INTERfaCE
sections
table of contents

Changing laN settings

All settings for the internal LAN setup of the Router can be viewed and changed here�
150N Wireless Router
1 2 3
(1)
(2)
(3)
(4)
(5)
(6)
4 5 6
1 IP address
The "IP address" is the internal IP address of the Router� The default IP
address is "192�168�2�1"� To access the advanced setup interface, type
this IP address into the address bar of your browser� This address can be
changed if needed� To change the IP address, type in the new IP address
and click "Apply Changes"� The IP address you choose should be a non-
routable IP� Examples of a non-routable IP are:
192�168�x�x (where x is anything between 1 and 254)
10�x�x�x (where x is anything between 1 and 254)
172�y�x�x (where x is anything between 1 and 254 and y is anything between
16 and 31)
2 subnet Mask
There is no need to change the subnet mask� This is a unique, advanced
feature of your Belkin Router� It is possible to change the subnet mask if
necessary; however, do NOT make changes to the subnet mask unless you
have a specific reason to do so� The default setting is "255�255�255�0"�
36
7 8 9 10