Targus Wireless 2.4GHz Presenter User Manual page 6

TARGUS WIRELESS 2.4GHz PRESENTER WITH CURSOR CONTROL
Step 2: The LED indicator will flash quickly. This means the ID setting
is refreshed and completed.
Method two:
Step 1: Press the connect button on the receiver. The LED of the
presenter will start to flash.
Step 2: Press the presenter's right button for 5 seconds. Please note
that this step must be completed within 8 seconds after step 1.
Step 3: The LED of the presenter will flash quickly. This means that the
ID setting is refreshed and completed.
Note: If the presenter does not work properly, please go back to step 1 to
repeat the ID setting process.
Fn
5