Targus Wireless 2.4GHz Presenter User Manual page 5

Installing the presenter
1. Please plug the receiver into the PC's USB port. The system will
automatically detect the wireless presenter. Follow the steps to search
the driver of the USB device and complete the setup.
2. Please install two AAA batteries into presenter with the correct
polarity. Please refer to the polarity sign inside the battery compart-
ment.
3. Establishing connection between the presenter and the receiver.
The product has been pre-set and paired between the presenter and
the receiver. It is not necessary to synchronize the device. However,
this paired ID may become lost due to RF interference and cause the
presenter to not connect properly.
There are two methods for setting the presenter's ID.
Method One:
Step 1: Press the "Right mouse Button" on the presenter for 5 seconds.
TARGUS WIRELESS 2.4GHz PRESENTER WITH CURSOR CONTROL
4