Troubleshooting ..................13 Specifications....................14 Legal notices ....................14 One-Year Limited Warranty..............17 Introduction Your RF-WFD301 Miracast Video Receiver uses a wireless communication system to transmit high quality video and audio to your TV from your mobile device, such as a smartphone or tablet.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. Rocketfish Miracast Video Receiver | RF-WFD301...
Page 4
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug.
• Leading-edge technology-Miracast technology works well across Android 4.2.1 and newer devices, regardless of brand Package contents Examine the contents of the box for your RF-WFD301 Miracast Video Receiver. The box should contain: • Rocketfish Miracast Video Receiver • 6” HDMI adapter •...
Page 6
Rocketfish Miracast video receiver Feature HDMI connector WPS button Micro USB jack Reset button HDMI adapter cable Standard USB connector Micro USB connector...
HDMI input that the Rocketfish Miracast Video Receiver is connected to. The LED on the Rocketfish Miracast Video Receiver starts to blink and the boot up splash screen is displayed within 30 seconds. If the LED doesn’t blink or the boot up splash screen is not seen,...
Setting up your receiver connection When used for the first time, the Rocketfish Miracast Video Receiver starts in Auto mode and is ready to accept a Wi-Fi direct connection. To set up your receiver connection: Make sure that the TV or projector screen shows the Rocketfish Miracast Video Receiver screen.
Rocketfish Miracast Video Receiver. Note: The default settings for your Rocketfish Miracast Video Receiver work in most scenarios. It's recommended that these settings only be changed by advanced users with an understanding of this technology.
Page 10
• HDCP–Select Unlock, 2.0 or 2.1. HDCP protects the digital rights of content owners. Your Rocketfish Miracast Video Receiver defaults to 2.0. • HDCP Legacy–Select ON or OFF. Your Rocketfish Miracast Video Receiver defaults to off. • Sys Info.–View your Rocketfish Miracast Video Receiver's...
RESET button on the receiver until the firmware update screen is displayed. The LED on the Rocketfish Miracast Video Receiver starts to blink and within 30 seconds the firmware update screen is displayed. If the LED doesn't blink or the firmware update screen is not seen,...
Page 12
On your computer, view your wireless networks, disconnect the computer from the current network, then connect to the WiFi-Video-Receiver wireless network. Open your web browser and enter http://192.168.16.1 in the browser tab. Enter “admin” for both user name and password, then click OK.
• Move the Rocketfish Miracast Video Receiver closer to the Miracast mobile device. The maximum connection distance is approximately 50 ft. • Make sure the Rocketfish Miracast Video Receiver has a secure connection to the HDMI port and USB port.
• Make sure there is nothing blocking the Rocketfish Miracast Video Receiver. • You may be too far away. Move closer to the Rocketfish Miracast Video Receiver. • Your remote control may have a low battery. Replace your remote control battery.
Product is determined to be defective by an authorized Rocketfish repair center or store personnel, Rocketfish will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Rocketfish and are not returned to you.