Tripp Lite SmartOnline Owner's Manual page 12

Manual Bypass Operation
(for power module maintenance or replacement)
A B
STEP 8: Loosen the screws in the contact cover . Slide the cover over the
A
C
C D
contacts . Tighten the screw to secure the cover. Warning: Use extreme
D
caution when handling the PDU. Do not allow the contacts to touch any
surface.
B
To reattach the PDU, reverse the process listed above.
A
Step 8
High Voltage Warnings
Contacts on Power/Battery Module Contacts on Detachable PDU
WARnIng! High Voltage! WARnIng! High voltage!
Risk of electrical shock! Risk of electrical shock!
Due to the presence of high voltage internal batteries, even If AC is present and Bypass Switch is set to "Bypass",
A B
without AC present, these contacts are live! these contacts are live!
Do not let these contacts touch any surface! Do not let these contacts touch any surface!
A
B
12