Lavry DA11 Manual page 7

DA11
When in the Setting mode, the LED's above each label indicate the status of each setting. The
cursor position affects the way an LED indicates the status.
- At the cursor position, a rapidly blinking LED indicates "on" and slowly blinking cursor
indicates "off."
- At all other positions, a steadily illuminated LED indicates "on," and an LED that is not
illuminated indicates "off."
Please note that in the following Setting mode function descriptions, the distinction between
whether the LED is at the cursor position or not may be omitted for clarity
Diagram 1, Section 2- Settings Status Display (only in Setting mode)
- Input selection. This consists of the xlr, opt (optical), usb, and rca labels and the LED's
above them. Only one input can be selected at any time.
- If the cursor is positioned at the selected input, the LED flashes rapidly.
- If the cursor is positioned at an input that is not selected, the cursor LED flashes slowly.
- When an input is selected and the cursor is at a different position, the LED for the selected
input is constantly illuminated while the LED for the cursor flashes slowly. Clicking the "Set"
switch will enable the input at the cursor position and disable the previously selected input (the
constantly illuminated LED will go dark and the cursor will flash rapidly).
- Once an input is selected and the cursor is still at that input position, subsequent "set" clicks
toggle that input on and off.
!!! Please Note: there are settings in the computer that affect the operation of the USB input.
Please see the "USB INPUT" section of the manual for details.
- Output muting. The main (XLR) outputs of the DA11 can be muted while the headphone
output remains active.
- If the output setting is "on" as indicated by the LED, the outputs are "on."
- If the output setting is "off," the main outputs are muted.
This function operates differently than the Mute function controlled by the optional infrared
remote. Like other functions in the Setting mode, if the cursor is positioned at the output LED, it
will flash rapidly to indicate that the function is "On." Clicking the set switch once will mute the
outputs and this will be indicated by a slowly flashing LED. When the cursor is at another
position, the LED is "off" (not illuminated) when the outputs are "off" (muted).
- Please use caution when turning the outputs "on;" it is a good idea to set the volume
to a low setting prior to turning the outputs "on."
- DO NOT use "earbuds" or other headphones designed for portable battery-powered
units such as MP3 players, or damage to the headphones may result.
- Polarity Invert. This function changes the audio signal polarity of both the main outputs and
the headphone output. The invert function is operational for all main output configurations-
balanced or unbalanced.
- If the invert function is "on" as indicated by the LED, the polarity is inverted in the output audio
for Pin 2 "+" operation and headphones.
- If the invert function is "off" as indicated by the LED, the polarity is not inverted in the output
audio for Pin 2 "+" operation and headphones.
- The sense of the function is reversed for Pin 3 "+" operation. For example, if the invert
function is "On," the output audio signal is not inverted for Pin 3 "+" operation.
Quickstart Guide
.
3