Page 1
LavryBlack Series Model DA10 Digital to Analog Converter Lavry Engineering, Inc. 945 Hildebrand Lane Suite 110 Bainbridge Island, WA 98110 http://lavryengineering.com email: techsupport@lavryengineering.com February 17, 2006...
Page 2
MODEL DA10 The LavryBlack DA10 features: Ultra low jitter modes (without sample rate conversion). Included sample rate conversion for non standard rates. Potentiometer free digitally controlled analog volume control. High power discrete headphone output. XLR, Coaxial (RCA) and Optical (Toslink light pipe) inputs. Stereo/Mono switch (for monitoring of stereo sound field).
CONFIGURING THE XLR OUTPUTS: The unit is factory configured to operate in Balanced output mode. The balanced signal comes out PIN 2 and PIN 3 of the XLR outputs. PIN 1 is a ground connection for the cable shield. The unit may be configured (via internal jumpers) to drive Unbalanced signals only, but the Balanced configuration can be made to drive an Unbalanced load when using the proper interconnecting cables as follows:...
C. VOLUME CONTROL: Note: the unit is shipped in BALANCED configuration. Internal jumpers enable Unbalanced operation with PIN 2 or PIN 3 HOT. Moving Jumpers is not usually required. See “Configuring the XLR Outputs” Volume Balanced Unbalanced Headphone Setting Configuration Configuration Level ----------------------------------------------------------------------------------...
Subject to the conditions set forth below, for six months after the original purchase date of the product, Lavry Engineering will repair the product free of charge in the United States in the event of a defect in materials or workmanship.