Product Record; Serial Plate Location; Conversion To Liquefi Ed Petroleum Gas; Grounding Instructions - Kenmore 790.3106 Series Use & Care Manual

Gas slide-in range
Hide thumbs Also See for 790.3106 Series:
Table of Contents

Advertisement

Product Record

In this space below, record the date of purchase, model and
serial number of your product. You will fi nd the model and
serial number printed on the serial plate.
790.
Model No. ______________________________________
Serial No. _______________________________________
Date of purchase ________________________________
Save these instructions and your sales receipt for future
reference.

Serial Plate Location

You will fi nd the model and serial number printed on the
serial plate. The serial plate is located along the interior side
trim and visible when the oven door is opened.
Remember to record the serial number for future reference.
Serial Plate Location
Conversion to Liquefi ed
Petroleum Gas (or L.P. Gas)
This natural gas range is designed to allow for conversion to
Liquefi ed Petroleum (L.P.) Gas.
Only a qualifi ed service agent should perform the L. P.
conversion. Contact the local gas provider for conversion.
The L. P. Conversion Kit is supplied with this range and is
located on the main back of the range. The kit contains
installation instructions which must be read before and
followed carefully when installing the kit.
To avoid serious injury, any additions,
changes or conversions required in order for this appliance
to satisfactorily meet the application needs must be made
by a qualifi ed service agent.

Grounding Instructions

For personal safety, the cooktop must be properly grounded.
For maximum safety, the power cord must be plugged into
an electrical outlet that is correctly polarized and properly
grounded.
DO NOT Operate the cooktop using a 2-prong adapter
or an extension cord. If a 2-prong wall receptacle is the
only available outlet, it is the personal responsibility of the
consumer to have it replaced with a properly grounded
3-prong wall receptacle installed by a qualifi ed electrician.
See the installation instructions packaged with this cooktop
for complete installation and grounding instructions.
This appliance is equipped with a 3-prong
grounding plug for your protection against shock hazard
and should be plugged directly into a properly grounded
receptacle. DO NOT cut or remove the grounding prong
from this plug.
Grounding
type wall
receptacle
Avoid fi re hazard or electrical shock. DO
NOT use an adapter plug, an extension cord, or remove
grounding prong from electrical power cord. Failure to
follow this warning can cause serious injury, fi re or death.
6
Do not, under any
circumstances, cut,
remove, or bypass
the grounding
prong.
Power supply
cord with 3-prong
grounding plug

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

790.3107 series

Table of Contents